Cisco Systems 7600 MIB specifications Errors detected on Frame Relay interfaces, 122

Chapter 3 Cisco 7600 MIB Specifications

RFC1315-MIB (Frame Relay)

•Errors detected on Frame Relay interfaces

MIB Constraints

Table 3-38lists the constraints that the Cisco 7600 Series router places on objects in the RFC1315-MIB. For detailed definitions of MIB objects, see the MIB. These constraints apply to all frame relay supported interfaces.

Table 3-38 RFC1315-MIB Constraints

MIB Object		Notes
frDlcmiTable
•	frDlcmiState	Values are:
		•	noLmiConfigured(1)
		•	ImiRev1(2)
		•	ansiT1-617-D(3)
		• itit933A(5) (Note: Value is defined in RFC2115.)
•	frDlcmiAddress	Values are:
		•	q922November90(3)
		•	q922(4)
		Always returns q922November90(3)
•	frDlcmiAddressLen	Value is two-octets(2)
•	frDlcmiMaxSupportedVCs	Read-only. Always returns a value of 992.
frCircuitTable

•frCircuitCommittedBurst

•frCircuitExcessBurst

•frCircuitThroughput

•frCircuitState

Normally, the QoS configuration entered through the Modular QoS CLI (MQC) syntax does not appear in these frCircuitTable objects.

However, when QoS is configured through the MQC and the following conditions are met, these frCircuitTable objects contain the QoS values as they are entered through the MQC:

•The default class is configured on the policy-map only.

•An output policy is attached to the Frame Relay (FR) Permanent Virtual Circuit (PVC).

•The Cisco-class-based-QoS (CBQ) enhancement only supports two MQC actions: police cir and shape.

•If both police cir and shape actions exist, then the FR traffic-shaping QoS takes precedence before policing.

	Cisco 7600 Series Router MIB Specifications Guide
3-122	OL-4077-07