Cisco Systems 7600 MIB Cisco-Image-Mib, Cisco-Image-Tc-Mib, Cisco-Ip-Stat-Mib, Cisco-Ip-Tap-Mib

Chapter 3 Cisco 7600 MIB Specifications

CISCO-IMAGE-MIB

Table 3-24 CISCO-IF-EXTENSION-MIB Constraints (continued)

MIB Object	Notes
cieIfDot1qCustomerEtherTypeTable	Not implemented.
cieIfNameMappingTable	Not implemented.

1 Some objects defined in cieIfPacketStatsTable and cieIfInterfaceTable are applicable to physical interfaces only. As a result, this table may be sparse for non-physical interfaces.

2 ATM interfaces do not support the cieIfKeepAliveEnabled object.

CISCO-IMAGE-MIB

The CISCO-IMAGE-MIB contains objects which identify the capabilities and characteristics of the Cisco IOS image.

CISCO-IMAGE-TC-MIB

The CISCO-IMAGE-TC-MIB defines the textual conventions used in the enhanced image MIB.''

CISCO-IP-STAT-MIB

The CISCO-IP-STAT-MIB contains objects to manage the collection and display of IP statistics, categorized by IP precedence and the Media Access Control (MAC) address associated with IP packets. To use the MIB to access additional IP statistics, you can issue the ip accounting mac-addressand ip accounting precedence commands at the CLI.CISCO-IPMROUTE-MIB

The CISCO-IPMROUTE-MIB contains objects to manage IP multicast routing on the router.

CISCO-IPSEC-FLOW-MONITOR-MIB

The CISCO-IPSEC-FLOW-MONITOR-MIB allows monitoring of the structures in IPSec-based Virtual Private Networks.

CISCO-IP-TAP-MIB

The CISCO-IP-TAP-MIB manages Cisco's intercept feature for IP. This MIB is used along with CISCO-TAP2-MIB to intercept IP traffic.

CISCO-IP-URPF-MIB

The CISCO-IP-URPF-MIB contains objects to manage Unicast Reverse Path Forwarding (URPF). URPF validates the source address of IP packets received on an interface to prevent Denial of Service attacks based on IP address spoofing.

Cisco 7600 Series Router MIB Specifications Guide

3-84 OL-4077-07