Cisco Systems 7600 MIB specifications Cisco-Bgp-Policy-Accounting-Mib

Chapter 3 Cisco 7600 MIB Specifications

CISCO-BGP-POLICY-ACCOUNTING-MIB

Table 3-4 CISCO-BCP-MIB Constraints

MIB Object		Notes
bcpConfigTable
•	bcpConfigBridgeIdControl	Read-only. Always disabled
•	bcpConfigBridgeId	Always 0. BcpConfigBridgeIdControl must be enabled
		to have value.
•	bcpConfigLineIdControl	Read-only. Always disabled
•	bcpConfigLineId	Always 0. BcpConfigLineIdControl must be enabled to
		have value.
•	bcpConfigMacSupport	Read-only. Always disabled
•	bcpConfigMacType	Always 0. BcpConfigMacControl must be enabled to
		have value.
•	bcpConfigTinygram	Read-only. Always disabled
•	bcpConfigMacAddressControl	Read-only. Always disabled
•	bcpConfigMacAddress	Read-only. Always 0000.0000.0000, since this is
		meaningful only if BcpConfigMacAddressControl is
		enabled.
•	bcpConfigSpanTreeControl	Read-only. Always disabled
•	bcpConfigSpanTree	Read-only. Always null (0).
		BcpConfigSpanTreeControl must be enabled to have
		value.

*If there is an entry in the ifTable with ifType ppp(23), there will be an entry in both the bcpOperTable and bcpConfigTable.

*The CISCO-BCP-MIB supports interfaces configured with bridge-enabled only, which means if no “bridge-enable” is configured, there will be no such entry for this interface when the user pulls the bcpOperTable or bcpConfigTable by SNMP.

CISCO-BGP-POLICY-ACCOUNTING-MIB

The CISCO-BGP-POLICY-ACCOUNTING-MIB contains BGP policy-based accounting information (such as ingress traffic on an interface), which can be used for billing purposes. The MIB provides support for BGP Policy Accounting, which enables you to classify IP traffic into different classes and to maintain statistics for each traffic class.

The MIB contains counts of the number of bytes and packets of each traffic type on each input interface. This information can be used to charge customers according to the route that their traffic travels.

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07 3-61