Cisco Systems 7600 MIB specifications 106

Chapter 3 Cisco 7600 MIB Specifications

MPLS-LDP-MIB

MIB Constraints

Table 3-32lists the constraints that the Cisco 7600 Series router places on objects in the

MPLS-LDP-MIB. For detailed definitions of MIB objects, see the MIB.

Table 3-32 MPLS-LDP-MIB Constraints

		MIB Object		Notes
		mplsLdpGeneralGroup
		•	mplsLdpLsrId	Read-only.
		•	mplsLdpLsrLoopDetectionCapable	Read-only. Loop Detection is supported by
				hopCountAndPathVector(5).
		•	mplsLdpEntityIndexNext	Read-only. Returns a value of 0.
		mplsLdpEntityTable
		•	mplsLdpEntityProtocolVersion	Read-only.
		•	mplsLdpEntityAdminStatus	Read-only. If adjacency is directed, value is
				always enabled(1).
		•	mplsLdpEntityOperStatus	Read-only. If adjacency is directed, then the
				operation status is always enabled(1). The
				adjacency does not appear in this table if
				operation status is down.
		•	mplsLdpEntityTcpDscPort	Read-only.
		•	mplsLdpEntityUdpDscPort	Read-only.
		•	mplsLdpEntityMaxPduLength	Read-only.
		•	mplsLdpEntityKeepAliveHoldTimer	Read-only.
		•	mplsLdpEntityHelloHoldTimer	Read-only.
		•	mplsLdpEntityInitSesThreshold	Read-only. Default value is 8.
		•	mplsLdpEntityLabelDistMethod	Read-only.
		•	mplsLdpEntityLabelRetentionMode	Read-only. If LC-ATM then values are
				conservative(1) otherwise liberal(2). If
				directed, then the value is liberal(2).
		•	mplsLdpEntityPVLimitMisTrapEnable	Read-only.
		•	mplsLdpEntityPVL	Read-only.
		•	mplsLdpEntityHopCountLimit	Read-only.
		•	mplsLdpEntityTargPeer	Read-only.
		•	mplsLdpEntityTargPeerAddrType	Read-only. Value is ipv4(1).
		•	mplsLdpEntityTargPeerAddr	Read-only.
		•	mplsLdpEntityOptionalParameters	Read-only. If LC-ATM, then values are
				atm(2), otherwise generic(1). If directed,
				then the value is generic(1).
		•	mplsLdpEntityDiscontinuityTime	Read-only.
		•	mplsLdpEntityStorType	Read-only. Value is volatile(2).
		•	mplsLdpEntityRowStatus	Read-only. Value is active(1).
	Cisco 7600 Series Router MIB Specifications Guide
3-106				OL-4077-07