Cisco Systems 7600 MIB specifications Dial-Control-Mib, Diffserv-Dscp-Tc, Diffserv-Mib, 100

Chapter 3 Cisco 7600 MIB Specifications

DIAL-CONTROL-MIB

DIAL-CONTROL-MIB

The DIAL-CONTROL-MIB contains objects that describe peer information for demand access and possibly other kinds of interfaces. Managing access circuits requires the following groups of information:

•General configuration information.

•Information to describe peer configuration and peer statistics. In this respect, peer configuration means information on how to connect to peers on outgoing calls, how to identify peers on incoming calls, and other call related configuration information.

•Information to store active call information.

•Information to retain call history.

DIFFSERV-DSCP-TC

DIFFSERV-DSCP-TC contains the definitions of the textual conventions that should be used whenever a Differentiated Services Code Point is used in a MIB.

DIFFSERV-MIB

The DIFFSERV-MIB defines the objects necessary to manage a device that uses the Differentiated Services Architecture described in RFC 2475.

DS1-MIB (RFC 1406, 2495, 2495)

The DS1-MIB module contains a description of DS1, E1, DS2, and E2 interfaces objects.

Note NOTE - Release 12.2(18)SXF and earlier support RFC1406. Release 12.2(33)SRA and later support RFC 2495DS3-MIB

MIB Constraints

Table 3-30describes constraints on objects from DS1-MIB definition. For detailed definitions of MIB objects, see the MIB.

Table 3-30 DS1-MIB Constraints

MIB Object Notes

dsx1ConfigTable

•dsx1LineStatusChangeTrapEnable Read-only.

	•	dsx1Channelization	Read-only.
	•	dsx1LineLength	Read-only.
	Cisco 7600 Series Router MIB Specifications Guide
3-100			OL-4077-07