Cisco Systems 7600 MIB specifications Cisco-Entity-Vendortype-Oid-Mib, Cisco-Envmon-Mib

Chapter 3 Cisco 7600 MIB Specifications

CISCO-ENTITY-VENDORTYPE-OID-MIB

Table 3-19 Default Values in the entSensorThreshold Table for DWDM GBIC Transceivers

MIB Sensor Object	High Alarm	High Warning	Low Warning	Low Alarm
Temperature	70.0	60.0	5.0	0.0
Voltage	5.5	5.2	4.7	4.5
Tx Bias Current	60.0	40.0	10.0	5.0
Tx Optical Power	3.4	3.2	-0.3	-0.5
Rx Optical Power	5.9	-6.7	-28.5	-28.5

Table 3-20lists the default values for the Cisco XENPAK transceivers in the entSensorThresholdTable.

Table 3-20 Default Values in the entSensorThreshold Table for XENPAK Transceivers

MIB Sensor Object	High Alarm	High Warning	Low Warning	Low Alarm
Temperature	70.0	60.0	5.00.0	0.0
Voltage	Not applicable.	Not applicable.	Not applicable.	Not applicable.
Tx Bias Current	80.0	75.0	15.0	10.0
Tx Optical Power	2.0	0.9	-4.0	-9.7
Rx Optical Power	2.0	0.4	-11.9	-15.0

CISCO-ENTITY-VENDORTYPE-OID-MIB

The CISCO-ENTITY-VENDORTYPE-OID-MIB defines the object identifiers (OIDs) assigned to various Cisco 7600 Series router components. The OIDs in this MIB are used by the entPhysicalTable of the ENTITY-MIB as values for the entPhysicalVendorType field in the entPhysicalTable. Each OID uniquely identifies a type of physical entity, such as a chassis, Optical Services Module, FlexWAN card, SPAs, and SIPs.

CISCO-ENVMON-MIB

The CISCO-ENVMON-MIB contains information about the status of environmental sensors (for voltage, temperature, and power supplies). It also contains MIB objects to enable and disable notifications for changes to the status of these sensors.

Note The CISCO-ENVMON-MIB is not supported by the shared port adapters (SPAs).

MIB Constraints

Table 3-21lists the constraints that the Cisco 7600 Series router places on objects in the

CISCO-ENVMON-MIB.

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07 3-77