Cisco Systems 7600 MIB specifications Cisco-Ietf-Frr-Mib, Cisco-Ietf-Ip-Mib

Chapter 3 Cisco 7600 MIB Specifications

CISCO-IETF-FRR-MIB

CISCO-IETF-FRR-MIB

The CISCO-IETF-FRR-MIB contains managed object definitions for MPLS Fast Reroute (FRR).

CISCO-IETF-IP-MIB

The CISCO-IETF-IP-MIB contains objects to manage the Internet Protocol (IPv6), but not IP routes. The MIB also contains objects to manage the Internet Control Message Protocol (ICMP). It is based on the IETF document draft-ietf-ipngwg-rfc2011-update-00.txt and supports read-only.

Note This MIB only supports IPv6 interfaces.

Table 3-23lists constraints that the Cisco 7600 Series router places on objects in the

CISCO-IETF-IP-MIB.

Table 3-23 CISCO-IETF-IP-MIB Constraints

MIB Object		Notes
•	cIpv6Forwarding	Read-only.
•	cIpv6DefaultHopLimit	Read-only.
cIpv6InterfaceTable
•	cIpv6InterfaceIdentifier	Read-only.

•cIpv6InterfaceIdentifierLength Read-only.

cIpAddressPfxTable

•	cIpAddressPfxOrigin	Read-only.
		Values:
		•	other(1)
		•	manual(2)
cIpAddressTable
•	cIpAddressOrigin	Read-only.
		Values:
		•	other(1)
		•	manual(2)
		•	wellknown(3)
•	cIpAddressStatus	Read-only. Value is depracated(2). No longer
		supported

cInetNetToMediaTable

•cInetNetToMediaPhysAddress Read-only.

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07 3-81