Cisco Systems 7600 MIB specifications Cisco-Entity-Asset-Mib

Chapter 3 Cisco 7600 MIB Specifications

CISCO-ENTITY-ASSET-MIB

Table 3-14lists the alarm descriptions and severity levels for the Cisco 7600 router FlexWAN

T1/E1 IMA ports.

Table 3-14	Alarms Supported for Cisco 7600 Router FlexWAN T1/E1 IMA Ports
			ceAlarmDescr
Physical Entity		ceAlarmDescrVendorType	Severity	ceAlarmDescrText
FlexWAN T1/E1		cevPortT1ImaLink	minor	Transmitter is sending remote
IMA ports		cevPortE1ImaLink		alarm
			minor	Transmitter is sending AIS
			minor	Receiver has loss of signal
			minor	Receiver is receiving AIS
			minor	Receiver has loss of frame
			minor	Receiver has remote alarm
			minor	Other failure
			minor	Physical port link down
			info	Physical port administrative
				state down

CISCO-ENTITY-ASSET-MIB

The CISCO-ENTITY-ASSET-MIB provides asset tracking information for the physical components in the ENTITY-MIB (RFC2737) entPhysicalTable.

The ceAssetTable contains an entry (ceAssetEntry) for each physical component on the router. Each entry provides information about the component, such as its orderable part number, serial number, hardware revision, manufacturing assembly number, and manufacturing revision.

Most physical components are programmed with a standard Cisco generic ID PROM value that specifies asset information for the component. If possible, the MIB accesses the component’s ID PROM information.

MIB Constraints

Table 3-15lists the constraints that the Cisco 7600 Series router places on objects in the

CISCO-ENTITY-ASSET-MIB.

	Table 3-15	CISCO-ENTITY-ASSET-MIB Object Constraints
	MIB Object	Notes
	ceAssetTable
	ceAssetOrderablePartNumber	Not implemented
	ceAssetSerialNumber	Not implemented
	ceAssetHardwareRevision	Not implemented
	ceAssetFirmwareRevision	Not implemented
	ceAssetsSoftwareRevision	Not implemented
		Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07			3-73