Cisco Systems 7600 MIB Mpls-Lsr-Std-Mib Rfc, MPLS-L3VPN-STD-MIB, Mpls-Tc-Mib, Mpls-Te-Mib, 112

Chapter 3 Cisco 7600 MIB Specifications

MPLS-LSR-STD-MIB (RFC 3031)

MPLS-LSR-STD-MIB (RFC 3031)

The MPLS-LSR-STD-MIB (RFC 3031) contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router.

MPLS-L3VPN-STD-MIB

The MPLS-L3VPN-STD-MIB contains managed object definitions for the Layer-3 Multiprotocol Label Switching Virtual Private Networks. This MIB is based on RFC 4382 specification.

MPLS-TC-MIB

The MPLS-TC-MIB defines Textual Conventions and OBJECT-IDENTITIES for use in documents defining management information bases (MIBs) for managing MPLS networks.

MPLS-TE-MIB

The MPLS-TE-MIB enables the Cisco 7600 Series router to perform traffic engineering for MPLS tunnels. The MIB is based on Revision 05 of the IETF MPLS-TE-MIB.

Traffic engineering support for MPLS tunnels requires the following configuration:

•Setting up MPLS tunnels with appropriate configuration parameters.

•Configuring tunnel loose and strict source routed hops.

MIB Constraints

Table 3-34lists the constraints that the Cisco 7600 Series router places on objects in the

MPLS-TE-MIB. For detailed definitions of MIB objects, see the MIB.

Table 3-34 MPLS-TE-MIB Constraints

		MIB Object		Notes
		mplsTunnelIndexNext		Read-only. Always 0.
		mplsTunnelTable
		•	mplsTunnelName	Read-only.
		•	mplsTunnelDescr	Read-only.
		•	mplsTunnelIsif	Read-only.
		•	mplsTunnelXCPointer	Read-only.
		•	mplsTunnelSignallingProto	Read-only.
		•	mplsTunnelSetupPrio	Read-only. Always 7.
		•	mplsTunnelHoldingPrio	Read-only. Always 7.
		•	mplsTunnelSessionAttributes	Read-only.
	Cisco 7600 Series Router MIB Specifications Guide
3-112				OL-4077-07