Cisco Systems 7600 MIB Mpls-Ldp-Generic-Std-Mib Rfc, Mpls-Ldp-Std-Mib Rfc, Mpls-Lsr-Mib, 109

Chapter 3 Cisco 7600 MIB Specifications

MPLS-LDP-GENERIC-STD-MIB (RFC 3815)

MPLS-LDP-GENERIC-STD-MIB (RFC 3815)

The MPLS-LDP-GENERIC-STD-MIB (RFC 3815)- This MIB contains managed object definitions for configuring and monitoring the Multiprotocol Label Switching (MPLS), Label Distribution Protocol (LDP), utilizing ethernet as the Layer 2 media.

MPLS-LDP-STD-MIB (RFC 3815)

The MPLS-LDP-STD-MIB (RFC 3815) contains managed object definitions for the Multiprotocol Label Switching, Label Distribution Protocol, (LDP) document.

MPLS-LSR-MIB

The MPLS-LSR-MIB provides configuration and remote performance monitoring information to manage label switched paths (LSPs) through a label switching router (LSR) that is using the Multiprotocol Label Switching (MPLS) technology. The router supports Version 5 of the

IETF MPLS-LSR-MIB. This MIB is not included in release 12.2(33)SRC. It is replaced by MPLS-LSR-STD-MIB.

MIB Constraints

Table 3-33lists the constraints that the Cisco 7600 Series router places on objects in the

MPLS-LSR-MIB. For detailed definitions of MIB objects, see the MIB.

Table 3-33 MPLS-LSR-MIB Constraints

	MIB Object			Notes
	mplsInterfaceConfTable
	•	mplsInterfaceConfStorageType		Default read-only (5).
	•	mplsInterfaceAvailableBandwidth		Read-only. Always 0.
	•	mplsInterfaceTotalBandwidth		Read-only. Always 0.
	•	mplsInterfaceTotalBuffer		Read-only. Always 0.
	•	mplsInterfaceAvailableBuffer		Read-only. Always 0.
	mplsInterfacePerfTable
	•	mplsInterfaceInPackets		Read-only. Always 0.
	•	mplsInterfaceInDiscards		Read-only. Always 0.
	•	mplsInterfaceFailedLabelLookup		Read-only. Always 0.
	•	mplsInterfaceOutPackets		Read-only. Always 0.
	•	mplsInterfaceOutDiscards		Read-only. Always 0.
	•	mplsInterfaceOutFragments		Read-only. Always 0.
	mplsInSegmentTable
	•	mplsInSegmentAdminStatus		Read-only. Always up(1).
			Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07					3-109