Cisco Systems 7600 MIB Cisco-Erm-Mib, Cisco-Ether-Cfm-Mib, Cisco-Flash-Mib, Cisco-Flex-Links-Mib

Chapter 3 Cisco 7600 MIB Specifications

CISCO-ERM-MIB

F

Table 3-21 CISCO-ENVMON-MIB Constraints

MIB Object		Notes
ciscoEnvMonVoltageStatusTable
•	ciscoEnvMonVoltageStatusDescr	Not implemented.
•	ciscoEnvMonVoltageStatusValue	Not implemented.
•	ciscoEnvMonVoltageThresholdLow	Not implemented.
•	ciscoEnvMonVoltageThresholdHigh	Not implemented.
•	ciscoEnvMonVoltageLastShutdown	Not implemented.
•	ciscoEnvMonVoltageState	Not implemented.
•	ciscoEnvMonEnableVoltageNotification	Not implemented.

CISCO-ENVMON-MIB Usage

The command show environment can be used to check environmental status through the CLI. The objects defined in ciscoEnvMonMIBNotificationEnables can be set to true using CLI command snmp-server enable traps environment.

CISCO-ERM-MIB

The CISCO-ERM-MIB is for the Embedded Resource Manager (ERM framework which helps in effectively managing resources such as cpu, memory, buffers, etc).

CISCO-ETHER-CFM-MIB

The CISCO-ETHER-CFM-MIB defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-end per service instance Ethernet layer Operations, Administration and Management (OAM) protocol.

CISCO-FLASH-MIB

The CISCO-FLASH-MIB contains objects to manage flash cards and flash-card operations.

CISCO-FLEX-LINKS-MIB

The CISCO-FLEX-LINKS-MIB is for configuration and status query of Flex Links feature on the Cisco device.

Flex Links are a pair of a Layer 2 interfaces, where one interface is configured to act as a backup to the other. The feature provides an alternative solution to the Spanning Tree Protocol (STP), allowing users to turn off STP and still provide basic link redundancy.

Cisco 7600 Series Router MIB Specifications Guide

3-78 OL-4077-07