Cisco Systems 7600 MIB specifications 115

Chapter 3 Cisco 7600 MIB Specifications

MPLS-VPN-MIB

Table 3-35 MPLS-VPN-MIB Constraints (continued)

MIB Object		Notes
•	mplsVpnVrfConfMidRouteThreshold	Read-only.
•	mplsVpnVrfConfHighRouteThreshold	Read-only
•	mplsVpnVrfConfMaxRoutes	Read-only
•	mplsVpnVrfConfMaxPossibleRoutes	Read-only. Always 0.
•	mplsVpnVrfDescription	Read-only

•mplsVpnInterfaceVpnClassification Read-only

mplsVpnInterfaceConfTable

•	mplsVpnInterfaceConfStorageType	Read-only. Volatile(2).
•	mplsVpnInterfaceConfRowStatus	Read-only.
		Values: active(1), notInService(2).
•	mplsVpnInterfaceLabelEdgeType	Read-only. providerEdge(1).
mplsVpnVrfRouteTargetTable
•	mplsVpnVrfRouteTargetRowStatus	Read-only. Values: active(1), notInService(2).
mplsVpnVrfBgpNbrAddrTable
•	mplsVpnVrfBgpNbrRowStatus	Read-only. Values: active(1), notInService(2).
•	mplsVpnVrfBgpNbrRole	Read-only. providerEdge(1).
•	mplsVpnVrfBgpNbrType	Read-only.
•	mplsVpnVrfBgpNbrAddr	Read-only.
•	mplsVpnVrfBgpNbrStorageType	Read-only. Volatile(2).
mplsVpnVrfRouteTable
•	mplsVpnVrfRouteInfo	Read-only. Value nullOID.
•	mplsVpnVrfRouteTarget	Read-only. Determines the route distinguisher for
		this target.
•	mplsVpnVrfRouteTargetDescr	Description of the route target. This object is not
		supported in this Cisco IOS release. Therefore, the
		object is the same as mplsVpnVrfRouteTarget.
•	mplsVpnVrfRouteDistinguisher	Read-only.
•	mplsVpnVrfRouteNextHopAS	Read-only. Always 0.
•	mplsVpnVrfRouteRowStatus	Read-only. This object normally reads active (1),
		but may read notInService (2), if a VRF was
		recently deleted.
•	mplsVpnVrfRouteStorageType	Read-only. Volatile(2).
•	mplsVpnVrfRouteDestAddrType	Read-only.
•	mplsVpnVrfRouteMaskAddrType	Read-only.
•	mplsVpnVrfRouteTos	Read-only. Always 0.
•	mplsVpnVrfRouteNextHop	Read-only.

•mplsVpnVrfRouteNextHopAddrType Read-only.

	Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07		3-115