Cisco Systems 7600 MIB specifications RFC2006-MIB MIP, Rmon-Mib Rfc, 123

Chapter 3 Cisco 7600 MIB Specifications

RFC1381-MIB (X25 LAPB)

Table 3-38	RFC1315-MIB Constraints (continued)
MIB Object	Notes
frErrTable	Not implemented.

frDLCIStausChange – No active(3) trap.

This trap is implemented according to the FRAME-RELAY-DTE-MIB (RFC2115). If the reason for the state change is due to the DLCMI going down, then DLCI traps are not be generated.

RFC1381-MIB (X25 LAPB)

The RFC1381-MIB is the SNMP MIB Extension for X.25 (specifications) LAPB (Link Access Procedure Balance protocol).

RFC1382-MIB (X25 Packet Layer)

The RFC1382-MIB was extracted from RFC 1382. Several changes were made to the MIB to allow it to compile in our environment:

•Remove IMPORT statements for EntryStatus, PositiveInteger, and ifIndexType.

•Hand-import the above types by copying the definitions from their respective files.

•The range of x25OperRestartCount is increased to be the largest integer possible.

RFC2006-MIB (MIP)

The RFC2006-MIB is the MIB module for the Mobile IP standard.

RMON-MIB (RFC 1757)

The RMON-MIB contains objects to remotely monitor devices in the network. This MIB supports the MIB version RFC 1757.

RMON2-MIB (RFC 2021)

The RMON2-MIB contains objects to manage remote monitoring device implementations. This MIB module enhances the original RMON MIB as specified in RFC 2021.

RS-232-MIB

The RS232-MIB contains objects to manage RS-232-like hardware interfaces and devices.

	Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07		3-123