Cisco Systems 7600 MIB CISCO-QLLC01-MIB, Cisco-Queue-Mib, Cisco-Resilient-Ethernet-Protocol-Mib

Chapter 3 Cisco 7600 MIB Specifications

CISCO-QLLC01-MIB

Table 3-26 CISCO-QINQ-VLAN-MIB Constraints (continued)

MIB Object		Notes
•	cqvTranslationTrunkPeVlanId	Read-only.
•	cqvTranslationTrunkCeVlanId	Read-only.
•	cqvTranslationType	Read-only.
•	cqvTranslationCosPBits	Read-only.
•	cqvTranslationRowStatus	Read-only.

CISCO-QLLC01-MIB

The CISCO-QLLC01-MIB contains objects to configure and monitor logical connections for the Qualified Logical Link Control (QLLC) protocol.

CISCO-QUEUE-MIB

The CISCO-QUEUE-MIB contains objects to manage interface queues, which can be used for FIFO, priority, custom, and fair queuing.

CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB

The CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB defines objects required for managing Resilient Ethernet Protocol (REP). Resilient Ethernet Protocol (REP) is a Cisco proprietary protocol that provides an alternative to Spanning Tree Protocol (STP). REP provides functionality to control network loops, handle link failures, and improve convergence time.

CISCO-RF-MIB

The CISCO-RF-MIB provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logical redundancy of software functionality and is designed to support 1:1 redundancy on processor cards (supervisor engines). Redundancy duplicates data elements and software functions to provide an alternative in case of failure.

Note For information about the levels of redundancy and how to verify that the redundancy feature is available on Cisco 7600 routers, see Appendix A, “Cisco Redundancy Features.”

MIB Constraints

Table 3-27lists the constraints that the Cisco 7600 Series router places on objects in the

CISCO-RF-MIB.

Cisco 7600 Series Router MIB Specifications Guide

3-90 OL-4077-07