Chapter 3 Cisco 7600 MIB Specifications

CISCO-IETF-ISIS-MIB

Table 3-23

CISCO-IETF-IP-MIB Constraints (continued)

 

 

 

MIB Object

 

Notes

cInetNetToMediaType

Read-only.

 

 

 

Values:

 

 

 

other(1)

 

 

 

dynamic(3)

 

 

 

static(4)

cInetNetToMediaState

Read-only. Value is invalid(5). Not supported.

 

 

 

 

cInetIcmpTable

 

 

 

cInetIcmpOutErrors

Not Implemented.

 

 

 

 

 

CISCO-IETF-ISIS-MIB

The CISCO-IETF-ISIS-MIB contains objects to manage IS-IS Routing protocol described in ISO 10589. IS-IS Routing protocol is used to construct routing tables for IP networks, as described in RFC 1195.

CISCO-IETF-IP-FORWARD-MIB

The CISCO-IETF-IP-FORWARD-MIB contains objects to manage multipath IP (IPv6) routes in a classless interdomain routing (CIDR) environment. This MIB is based on the IETF document draft-ietf-ipngwg-rfc2096-update-00.txt and supports read-only.

CISCO-IETF-PPVPN-MPLS-VPN-MIB

The CISCO-IETF-PPVPN-MPLS-VPN-MIB is an extension of the MPLS-VPN-MIB. It contains a new notification, mplsNumVrfRouteMaxThreshCleared, which was added with MPLS-VPN-MIB-DRAFT-05.

CISCO-IETF-PW-ATM-MIB

The CISCO-IETF-PW-ATM-MIB contains managed object definitions for Pseudo Wire emulation of ATM over Packet Switched Networks(PSN).

CISCO-IETF-PW-ENET-MIB

The CISCO-IETF-PW-ENET-MIB describes a model for managing Ethernet point-to-point pseudo wire services over a Packet Switched Network (PSN).

Cisco 7600 Series Router MIB Specifications Guide

3-82

OL-4077-07

 

 

Page 82
Image 82
Cisco Systems 7600 MIB specifications Cisco-Ietf-Isis-Mib, Cisco-Ietf-Ip-Forward-Mib, Cisco-Ietf-Ppvpn-Mpls-Vpn-Mib