Cisco Systems 7600 MIB specifications Cisco-Enhanced-Memory-Pool-Mib

Chapter 3 Cisco 7600 MIB Specifications

CISCO-ENHANCED-MEMORY-POOL-MIB

CISCO-ENHANCED-MEMORY-POOL-MIB

The CISCO-ENHANCED-MEMORY-POOL-MIB contains objects to monitor memory pools on all of

the physical entities on a managed system. Represents the different types of memory pools that may be present in a managed device. Memory use information is provided to users at three different intervals of time: 1 minute, 5 minutes, and 10 minutes. Memory pools can be categorized into two groups, predefined

pools and dynamic pools. The following pool types are currently predefined:

•1:Processor memory

•2:I/O memory

•3:PCI memory

•4:Fast memory

•5:Multibus memory

Dynamic pools have a pool type value greater than any of the predefined types listed above. Only the processor pool is required to be supported by all devices. Support for other pool types is dependent on the device being managed. For detailed definitions of the CISCO-ENHANCED-MEMORY-POOL-MIB objects, see the MIB.

MIB Constraints

Table 3-7lists the constraints that the Cisco 7600 Series router places on objects in the CISCO-ENHANCED-MEMORY-POOL-MIB. For detailed definitions of MIB objects, see the MIB.

Table 3-7 CISCO-ENHANCED-MEMORY-POOL-MIB Constraints

MIB Object		Notes
ciscoMemoryPoolTable
•	cempMemPoolType	Values are:
		•	processorMemory(2)
		•	ioMemory(3)
•	cempMemPoolAlternate	Always 0.
•	cempMemPoolPlatformMemory	Always 0.

MIB Usage Values for Cisco FlexWAN and FlexWAN2 Cards

There are two types of memory available on the Enhanced FlexWAN cards, processor and PCI. Only the processorMemory(2) and ioMemory (3) pool types are supported. Table 3-8lists the memory pool names corresponding to each pool type:

Cisco 7600 Series Router MIB Specifications Guide

3-68 OL-4077-07