Getting started

Battery installation (continued)

4.Charge the handset by placing it in the telephone base or charger. The CHARGE light is on when the handset is charging.

CHARGE light remains on when charging.

IMPORTANT:

Check for a dial tone by pressing . If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures described above are properly done.

It may be a wiring problem. If you have changed your telephone service to digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Refer to Rewiring of telephone line for cable/VoIP service users on page 8 for more information.

If the handset will not be used for a long time, disconnect and remove the

battery to prevent possible leakage.

To purchase replacement batteries, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.

Page 8
Image 8
VTech CS6428-2/CS6429/ CS6249-15/CS6429-16/ CS6429-2/CS6429-3/ CS6429-4/CS6429-5 user manual If you do not hear a dial tone