![](/images/new-backgrounds/1251395/25139511x1.webp)
Getting started
Telephone base and charger installation
Install the telephone base and charger(s) as shown below.
If you subscribe to digital subscriber line (DSL)
The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, refer to Tabletop to wall mount installation on page 6 for details.
Telephone base | Telephone wall jack | Charger adapter |
power adapter | A DSL filter (not |
|
|
| |
| included) is required |
|
Electrical outlet | if you have DSL high- |
|
speed Internet service. |
| |
not controlled by | The DSL filter must |
|
a wall switch |
| |
be plugged into the |
| |
|
| |
| telephone wall jack. |
|
| Electrical outlet |
| not controlled by |
Telephone | a wall switch |
line cord |
|
Telephone base | Charger |
CAUTION: If you subscribe to telephone service from a cable company or a VoIP service provider, plug the telephone line cord into the modem/router/terminal adapter provided by your cable/VoIP service provider. Contact your cable/VoIP service provider if you have any difficulties in installation.
•Use only the power adapters supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 (800)
1 (800)
•The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,