Answering system settings
Call screening
You can listen at the telephone base to a caller leaving a message. If you want to turn off the call screening feature, use a system handset to turn this feature off.
1.Press MENU/SELECT when the handset is not in use.
2.Press 
or 
to select >ANSWERING SYS, then press MENU/SELECT.
3.Press 
or 
to select >ANS SYS SETUP, then press MENU/SELECT.
4.Press MENU/SELECT to select >CALL SCREENING.
5.Press 
or 
to choose ON or OFF, then press MENU/SELECT to save. You hear a confirmation tone.
Number of rings
You can set the answering system to answer an incoming call after two, three, four, five, six rings; or toll saver. With toll saver selected, the answering system answers a call after two rings if you have new messages, and after four rings when there are no new messages. This feature allows you to check for new messages and avoid paying long distance charges if you are calling from out of your local area.
1.Press MENU/SELECT when the handset is not in use.
2.Press 
or 
to scroll to >ANSWERING SYS, then press MENU/SELECT.
3.Press 
or 
to scroll to >ANS SYS SETUP, then press MENU/SELECT.
4.Press 
or 
to scroll to ># OF RINGS, then press MENU/SELECT.
5.Press 
or 
to scroll and choose among 2, 3, 4, 5, 6 or TOLL SAVER.
6.Press MENU/SELECT to save. You hear a confirmation tone.
Remote access code
A
1.Press MENU/SELECT when the handset is not in use.
2.Press 
or 
to select >ANSWERING SYS, then press MENU/SELECT.
3.Press 
or 
to select >ANS SYS SETUP, then press MENU/SELECT.
4.Press 
or 
to select >REMOTE CODE, then press MENU/SELECT.
5.Press the dialing keys 
or 
to select from 00 to 99, then press MENU/SELECT to save your selection. You hear a confirmation tone.
39
