Precision Power manual End Plate Diagrams, 12 D500/1, D1000/1, D2000/1, D3000/1

12.-12dB Input Attenuation: Push this switch ‘IN’ for high voltage

(4V-12V) capability. This button pushed ‘IN’ must be used for speaker level input on common ground head-units or for high voltage line drivers.

13.Phase: These switch sets the phase of the output relative to the amplifier input.

14.RCA Outputs: RCA outputs provide HP/LP/FULL 30-4kHz signal to another amplifier.

END PLATE DIAGRAMS

12

D500/1, D1000/1

QBASS

REMOTE

1	1	2
D2000/1, D3000/1
		QBASS
		REMOTE

3	4
+18	0
QBASS

3	4
+18	0
QBASS

1.Power/Ground PowerLockTM: Note that the D2000/1 and D3000/1 have two of these receptacles. You must connect the power and ground cables to both PowerLockTM terminals for optimum operation.

2.QBASS REMOTETM: Plug in the data cable from the optional QBASS REMOTETM dash mounted level control here. (The remote level control will bypass the amplifier’s on board QBASSTM control.

3.QBASSTM Level Control: Controls bass boost, centered at 40Hz with up to 18dB of boost.

14