Transition Networks SISGM1040-244 user manual AutoTrueFalse

Transition NetworksSISGM1040-244

		cost when selecting
		an interface to place
		into the forwarding
		state.
stp-path-priority	I	Use the spanning-tree	switch(config)#interface
[Port Priority]		port-priority interface	fastEthernet 2
		configuration	switch(config-if)#stp-path-priority
		command to configure	128
		a port priority that
		is used when two
		switches tie for
		position as the root
		switch.
stp-admin-p2p	I	Admin P2P of STP	switch(config)#interface
[AutoTrueFalse]		priority on this	fastEthernet 2
		interface.	switch(config-if)#stp-admin-p2p
			Auto
stp-admin-edge	I	Admin Edge of STP	switch(config)#interface
[TrueFalse]		priority on this	fastEthernet 2
		interface.	switch(config-if)#stp-admin-edge
			True
stp-admin-non-stp	I	Admin NonSTP of STP	switch(config)#interface
[TrueFalse]		priority on this	fastEthernet 2
		interface.	switch(config-if)#stp-admin-non-s
			tp False
show spanning-tree	E	Displays a summary of	switch>show spanning-tree
		the spanning-tree
		states.
no spanning-tree	G	Disable spanning-tree.	switch(config)#no spanning-tree

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600