HP 16555D, 16555A CommandMACHine12TWAVeformRUNTil rununtilspec, MACHine12TWAVeformRUNTil?, 13-21

TWAVeform Subsystem

RUNTil

RUNTil

Command:MACHine{12}:TWAVeform:RUNTil <run_until_spec>

<run_until_ spec>

<value>

Example

Query

Returned Format

Example

The RUNTil (run until) command defines stop criteria based on the time between the X and O markers when the trace mode is in repetitive. When OFF is selected, the analyzer will run until either the STOP touch screen field is touched, or, the STOP command is sent. Run until time between X and O marker options are:

∙Less Than (LT) a specified time value.

∙Greater Than (GT) a specified time value.

∙In range (INRange) between two time values.

∙Out of range (OUTRange) between two time values.

End points for INRange and OUTRange should be at least 2 ns apart since this is the minimum time at which data is sampled.

This command affects the timing analyzer only, and has no relation to the RUNTil commands in the SLISt and COMPare subsystems.

{OFF LT,<value> GT,<value> INRange,<value>, <value> OUTRange,<value>,<value>}

real number

OUTPUT XXX;":MACHINE1:TWAVEFORM:RUNTIL GT, 800.0E−6" OUTPUT XXX;":MACHINE1:TWAVEFORM:RUNTIL INRANGE, 4.5, 5.5"

:MACHine{12}:TWAVeform:RUNTil?

The RUNTil query returns the current stop criteria.

[:MACHine{12}:TWAVeform:RUNTil] <run_until_spec><NL>

OUTPUT XXX;":MACHINE1:TWAVEFORM:RUNTIL?"

13–21