TTRigger (TTRace) Subsystem
FIND
Query | :MACHine{12}:TTRigger:EDGE<N>? <label_name> |
The EDGE query returns the current specification for the given label.
Returned Format [:MACHine{12}:TTRigger:EDGE<N>] <label_name>,<edge_spec><NL>
Example | OUTPUT XXX;":MACHINE1:TTRIGGER:EDGE1? ’DATA’" |
|
|
| FIND |
Command | :MACHine{12}:TTRigger:FIND<N> <time_qualifier>, |
| <condition_mode> |
| The FIND command defines the qualifier for a given sequence level. The |
| qualifier tells the timing analyzer when to proceed to the next sequence level. |
| When this proceed qualifier is matched for either the specified time or |
| occurrence, the sequencer will proceed to the next sequence level. In the |
| sequence level where the trigger is specified, the FIND command specifies |
| the trigger qualifier (see SEQuence command). |
| The terms A through G and I are defined by the TERM command. The |
| meaning of IN_RANGE and OUT_RANGE is determined by the RANGe |
| command. The edge terms are defined by the EDGE command. Expressions |
| are limited to what you could manually enter through the Timing Trigger |
| menu. Regarding parentheses, the syntax definitions below show only the |
| required ones. Additional parentheses are allowed as long as the meaning of |
| the expression is not changed. See figure |
| example. |
<N> | integer from 1 to the number of existing sequence levels (maximum 10) |
<time_ | <qualifier> see "Qualifier" on page |
qualifier> |
|
<condition_ | {{GTLT}, <duration_time>OCCurrence, <occurrence>} |
mode> |
|
GT | greater than |