Command
Example
TTRigger (TTRace) Subsystem
CLEar
Terms A through E, RANGE 1, EDGE1, and TIMER 1 must be grouped together and terms F, G, and I, RANGE 2, EDGE2, and TIMER 2 must be grouped together. In the first level, terms from one group may not be mixed with terms from the other. For example, the expression ((A OR IN_RANGE2) AND (C OR G)) is not allowed because the term C cannot be specified in the F, G, and I group.
In the first level, the operators you can use are AND, NAND, OR, NOR, XOR, NXOR. Either AND or OR may be used at the second level to join the two groups together. It is acceptable for a group to consist of a single term. Thus, an expression like (B AND G) is legal since the two operands are both simple terms from separate groups.
CLEar
:MACHine{12}:TTRigger:CLEar
{AllSEQuenceRESource}
The CLEar command allows you to clear all settings in the Timing Trigger menu, clear only the sequence levels, or clear only the resource term patterns. Cleared values are set to their defaults.
OUTPUT XXX;":MACHINE1:TTRIGGER:CLEAR RESOURCE"