STRigger (STRace) Subsystem
FIND
|
| FIND |
Command | :MACHine{12}:STRigger:FIND<N> | |
|
| <proceed_qualifier>,<occurrence> |
|
| The FIND command defines the proceed qualifier for a given sequence level. |
|
| The qualifier tells the state analyzer when to proceed to the next sequence |
|
| level. When this proceed qualifier is matched the specified number of times, |
|
| the sequencer will proceed to the next sequence level. In the sequence level |
|
| where the trigger is specified, the FIND command specifies the trigger |
|
| qualifier (see SEQuence command). |
|
| The terms A through J are defined by the TERM command. The meaning of |
|
| IN_RANGE and OUT_RANGE is determined by the RANGe command. |
|
| Expressions are limited to what you could manually enter through the State |
|
| Trigger menu. Regarding parentheses, the syntax definitions below show |
|
| only the required ones. Additional parentheses are allowed as long as the |
|
| meaning of the expression is not changed. See page |
|
| example. |
<N> | integer from 1 to (number of existing sequence levels −1) | |
<occurrence> | integer from 1 to 1048575 | |
<proceed_ | <qualifier> see "Qualifier" on page | |
qualifier> |
| |
|
|
|
Example | OUTPUT XXX;":MACHINE1:STRIGGER:FIND1 ’ANYSTATE’, 1" | |
|
| OUTPUT XXX;":MACHINE1:STRIGGER:FIND3 ’((NOTA AND NOTB) OR |
|
| G)’, 1" |
|
|
|