MACHine Subsystem

ARM

ARM

Command:MACHine{12}:ARM <arm_source>

The ARM command specifies the arming source of the specified analyzer (machine). The RUN option disables the arm source. For example, if you do not want to use either the intermodule bus or the other machine to arm the current machine, you specify the RUN option.

If you are using an HP 16500C mainframe, you can set up OR’d Triggering by arming the module from INTermodule when intermodule is set to Group Run with OR TRIGGER. See the HP 16500C Programmer’s Guide for details.

<arm_source> {RUNINTermoduleMACHine{12}}

Example

OUTPUT XXX;":MACHINE1:ARM MACHINE2"

 

 

Query:MACHine{12}:ARM?

The ARM query returns the source that the current analyzer (machine) will be armed by.

Returned Format [:MACHine{12}:ARM] <arm_source>

Example

OUTPUT XXX;":MACHINE1:ARM?"

 

 

3–5