AMX NI-3101-SIG manual Xchm, Sendcommand DEV,XCHM extended channel mode, Sendcommand IR1,XCHM

Programming

IR/Serial Send_Commands (Cont.)

Command	Description
XCHM	Syntax:
Changes the IR output pat-	SEND_COMMAND <DEV>,"'XCHM <extended channel mode>'"
tern for the 'XCH' send	Variable:
command.	extended channel mode = 0 - 4.
	Example:
	SEND_COMMAND IR_1,"'XCHM 3'"
	Sets the IR_1 device's extended channel command to mode 3.
	Mode 0 Example (default): [x][x]<x><enter>
	SEND_COMMAND IR_1,"'XCH 3'"
	Transmits the IR code as 3-enter.
	SEND_COMMAND IR_1,"'XCH 34'"
	Transmits the IR code as 3-4-enter.
	SEND_COMMAND IR_1,"'XCH 343'"
	Transmits the IR code as 3-4-3-enter.
	Mode 1 Example: <x> <x> <x> <enter>
	SEND_COMMAND IR_1,"'XCH 3'"
	Transmits the IR code as 0-0-3-enter.
	SEND_COMMAND IR_1,"'XCH 34'"
	Transmits the IR code as 0-3-4-enter.
	SEND_COMMAND IR_1,"'XCH 343'"
	Transmits the IR code as 3-4-3-enter.
	Mode 2 Example: <x> <x> <x>
	SEND_COMMAND IR_1,"'XCH 3'"
	Transmits the IR code as 0-0-3.
	SEND_COMMAND IR_1,"'XCH 34'"
	Transmits the IR code as 0-3-4.
	SEND_COMMAND IR_1,"'XCH 343'"
	Transmits the IR code as 3-4-3.
	Mode 3 Example: [[100][100]…] <x> <x>
	SEND_COMMAND IR_1,"'XCH 3'"
	Transmits the IR code as 0-3.
	SEND_COMMAND IR_1,"'XCH 34'"
	Transmits the IR code as 3-4.
	SEND_COMMAND IR_1,"'XCH 343'"
	Transmits the IR code as 100-100-100-4-3.
	Mode 4:
	Mode 4 sends the same sequences as the 'CH' command. Only use Mode 4 with
	channels 0 - 199.

NI-3101-SIG Signature Series NetLinx Integrated Controller 165