AMX NI-3101-SIG manual Ethernet ports used by the Integrated Controllers

	Connections and Wiring
Ethernet ports used by the Integrated Controllers
Ethernet Ports Used by the NetLinx Integrated Controllers
Port type	Description	Standard Port
		#
FTP	The on-board Master has a built-in FTP server.	21/20 (TCP)
SSH	The SSH port functions using the same interface as Telnet but over a	22 (TCP)
	secure shell where it uses SSL as a mechanism to configure and diagnose
	a NetLinx system. This port value is used for secure Telnet
	communication.
	Note: only SSH version 2 is supported.
Telnet	The NetLinx Telnet server provides a mechanism to configure and	23 (TCP)
	diagnose a NetLinx system.
	For maximum flexibility, the Master can be configured to utilize a different
	port than 23, or disable Telnet completely from either Telnet or the
	Program port located on the rear of the Master itself. Once disabled, the
	only way to enable Telnet again is from the Master’s Program port.
HTTP	The Master has a built-in web server that complies with the HTTP 1.0	80 (TCP)
	specification and supports all of the required features of HTTP v1.1.
	This port is used for unsecure HTTP Internet communication between the
	web browser’s UI and the target Master.
HTTPS/SSL	This port is used by a web browser for secure communication between the	443 (TCP)
	web server UI and the target Master. This port is also used for
	simultaneous encryption of this data, using the SSL certificate information
	on the Master as a key.
ICSP	Peer-to-peer protocol used for both Master-to-Master and Master-to-	1319 (UDP/TCP)
	device communications.
	For maximum flexibility, the Master can be configured to utilize a different
	port than 1319, or disable ICSP over Ethernet completely from either
	Telnet or the Program Port located on the rear of the Master itself.
	This type of communication is used by the various AMX products for
	communication amongst themselves.
integration!	This feature on the Master uses, by default, port 10500 for the XML based	10500 (TCP)
Solutions	communication protocol. This port is connected to by the client web
	browser’s JVM when integration! Solutions control pages are retrieved
	from the on-board Master’s web server.
	For maximum flexibility, the on-board Master can be configured to utilize a
	different port than 10500 or to disable integration! Solutions completely.

NI-3101-SIG Signature Series NetLinx Integrated Controller 19