AMX NI-3101-SIG manual Access Rights Menu

NetLinx Security with a Terminal Connection

Press <Enter> to exit the menu and return to the previous menu. The Access Rights Menu is described in the following table:

Access Rights Menu

Command		Description
1)	Terminal (RS232/USB) Access	Enables/disables Terminal Access through the USB connector.
	(Enable/Disable)	The account has sufficient access rights to login to a Terminal
		session if this option is enabled.
2)	Admin Change Password Access	Enables/disables Administrator Change Password Access. The
	(Enable/Disable)	account has sufficient access rights to change the administrator
		password if this option is enabled.
3)	FTP Access	Enables/disables FTP Access. The account has sufficient access
	(Enable/Disable)	rights to access the NetLinx Master's FTP Server if this option is
		enabled.
4)	HTTP Access	This selection enables/disables HTTP (Web Server) Access. The
	(Enable/Disable)	account has sufficient access rights to browse to the NetLinx
		Master with a Web Browser if this option is enabled.
5)	Telnet Access	This selection enables/disables Telnet Access. The account has
	(Enable/Disable)	sufficient access rights to login to a Telnet session if this option is
		enabled.
6)	Configuration Access	This selection enables/disables Configuration Access rights for
	(Enable/Disable)	the target Master. The account has sufficient access rights to
		access the Main Security Menu if this option is enabled.
5)	ICSP Security	This selection enables/disables ICSP communication access. The
	(Enabled/Disabled)	account has sufficient access rights to initiate ICSP data
		communication.
6)	ICSP Encryption Required	This selection enables/disables the need to require encryption of
	(Enabled/Disabled)	the ICSP communicated data.
		If enabled:
		- All communicating AMX components must authenticate with
		a valid username and password before beginning
		communication with the Master.
		- All communication must be encrypted.

Option 5 - Delete user

1.Type 5 and <Enter> at the Security Setup prompt (at the bottom of the Main Security Menu) to delete an existing user account. A sample session response is:

Select from the following list of enrolled users:

1)administrator

2)NetLinx

3)techpubs

4)Pat

Select User ->

2.Enter the value associated to the user you want to delete and press <Enter>. This action deletes the user account and returns you to the Security Setup menu.

Changes made to the target Master from within the Terminal window are not reflected within the web browser, until the Master is rebooted and the web browser connection is refreshed. Any changes made to the Master, from within the web browser are instantly reflected within the Terminal session without the need to reboot.

124 NI-3101-SIG Signature Series NetLinx Integrated Controller