AMX NI-3101-SIG manual Option 9 Delete Group, Option 10 Show List of Authorized Groups

NetLinx Security with a Terminal Connection

2.Select a group from the list of currently enrolled groups and press <Enter> to open the Edit Group Menu. This is the same Edit Group Menu that was access via the Add Group option:

1)Add Directory Association

2)Delete Directory Association

3)List Directory Associations

4)Change Access Rights

5)Display Access Rights

Or <ENTER> to return to previous menu

Edit group ->

This menu is described on the previous pages (see Edit Group Menu section on page 125).

Option 9 - Delete Group

1.Type 9 and <Enter> at the Security Setup prompt (at the bottom of the Main Security Menu) to delete an existing group account. A sample session response is:

Select from the following list:

1)Group 1

2)Group 2 Select group ->

2.Select the group account to be deleted, and press <Enter> to delete the group and return to the Security Setup menu.

Changes made to the target Master from within the Terminal window are not reflected within the web browser, until the Master is rebooted and the web browser connection is refreshed.

Any changes made to the Master, from within the web browser are instantly reflected within the Terminal session without the need to reboot.

Option 10 - Show List of Authorized Groups

1.Type 10 and <Enter> at the Security Setup prompt (at the bottom of the Main Security Menu) to display a list of all authorized group accounts. A sample session response is:

The following groups are currently enrolled: administrator

Group 1

Press <ENTER> key to continue

2.Press <Enter> to return to the Security Setup Menu.

Option 11 - Set Telnet Timeout in seconds

This feature is disabled after the installation of firmware build 130 or higher onto your target Master.

1.Type 11 and <Enter> at the Security Setup prompt (at the bottom of the Main Security Menu) to set the Telnet Timeout value, in seconds. A sample session response is:

Specify Telnet Timeout in seconds:

2.Enter the number of seconds before you want The Telnet session to timeout, and press <Enter> to return to the Security Setup Menu.

128 NI-3101-SIG Signature Series NetLinx Integrated Controller