AMX manual IR/Serial Port Connections and Wiring, Port Wiring Specifications NI-3101-SIG

Connections and Wiring

I/O Port Wiring Specifications - NI-3101-SIG

Pin	Signal	Function
1	GND	Signal GND
2	I/O 1	Input/Output
3	I/O 2	Input/Output
4	I/O 3	Input/Output
5	I/O 4	Input/Output
6	I/O 5	Input/Output
7	I/O 6	Input/Output
8	I/O 7	Input/Output
9	I/O 8	Input/Output
10	12 VDC	PWR

IR/Serial Port: Connections and Wiring

Up to eight IR- or Serial-controllable devices may be connected to the IR/Serial connectors on the rear of the NI-3101 (FIG. 10). These connectors accept an IR Emitter (CC-NIRC) that mounts onto the device's IR window, or a mini-plug (CC-NSER) that connects to the device's control jack. A data 0 - 5 VDC device may also be connected. These units come with two CC-NIRC IR Emitters (FG10-000-11).

IR / SERIAL (Ports 9-16)

8 7 6 5 4 3 2 1

NI-3101-SIG IR/Serial connector

configuration (Port 9-16)

FIG. 10 IR/SERIAL (male)

The IR/Serial connector wiring specifications are listed in the following table:

IR/Serial Connector Wiring Specifications (per Port)

Number of IR	NI-3101-SIG	Signal	Function
connections	Port #
1	9		GND (-)
			Signal 1 (+)
2	10		GND (-)
			Signal 2 (+)
3	11		GND (-)
			Signal 3 (+)
4	12		GND (-)
			Signal 4 (+)
5	13		GND (-)
			Signal 5 (+)
6	14		GND (-)
			Signal 6 (+)
7	15		GND (-)
			Signal 7 (+)
8	16		GND (-)
			Signal 8 (+)

NI-3101-SIG Signature Series NetLinx Integrated Controller 17