AMX NI-3101-SIG manual Ctof, Cton, GET Mode, Iroff

	Programming
IR/Serial Send_Commands (Cont.)
Command	Description
CTOF	Off time settings are stored in non-volatile memory. This command sets the
Set the duration of the Off	delay time between pulses generated by the 'CH' or 'XCH' send commands in
	tenths of seconds.
time (no signal) between IR
	Syntax:
pulses for channel and IR
function transmissions.	SEND_COMMAND <DEV>,"'CTOF',<time>"
	Variable:
	time = 0 - 255. Given in 1/10ths of a second. Default is 5 (0.5 seconds).
	Example:
	SEND_COMMAND IR_1,"'CTOF',10"
	Sets the off time between each IR pulse to 1 second.
CTON	This command sets the pulse length for each pulse generated by the 'CH' or
Set the total time of IR pulses	'XCH' send commands in tenths of seconds.
transmitted and is stored in	Syntax:
non-volatile memory.	SEND_COMMAND <DEV>,"'CTON',<time>"
	Variable:
	time = 0 - 255. Given in 1/10ths of a second. Default is 5 (0.5 seconds).
	Example:
	SEND_COMMAND IR_1,"'CTON',20"
	Sets the IR pulse duration to 2 seconds.
GET BAUD	The port sends the parameters to the device that requested the information.
Get the IR port’s current	Only valid if the port is in Data Mode (see SET MODE command).
DATA mode communication	The port responds with:
parameters.	<port #> <baud>,<parity>,<data bits>,<stop bits>
	Syntax:
	SEND_COMMAND <DEV>,"'GET BAUD'"
	Example:
	SEND_COMMAND IR_1,"'GET BAUD'"
	System response example:
	PORT 9 IR,CARRIER,IO LINK 0
GET MODE	The port responds with: <port #> <mode>,<carrier>,<io link channel>.
Poll the IR/Serial port's	Syntax:
configuration parameters and	SEND_COMMAND <DEV>,"'GET MODE'"
report the active mode
	Example:
settings to the device
requesting the information.	SEND_COMMAND IR_1,"'GET MODE"
	The system could respond with:
	PORT 4 IR,CARRIER,IO LINK 0
IROFF	Syntax:
Halt and Clear all active or	SEND_COMMAND <DEV>,"'IROFF'"
buffered IR commands being	Example:
output on the designated
	SEND_COMMAND IR_1,"'IROFF"
port.
	Immediately halts and clears all IR output signals on the IR_1 port.

NI-3101-SIG Signature Series NetLinx Integrated Controller 161