AMX NI-3101-SIG manual G4WC, Used to determine each unique listing, ~Ignoreexternal, Clockcommands

Programming

Master Send_Commands (Cont.)

Command	Description
G4WC	The internal G4WC Send command (to Master 0:1:0) has been revised to add
Add G4 Web Control devices	G4 WebControl devices to Web control list displayed in the browser.
to Web control list displayed	Syntax:
by the Web server in a	SEND_COMMAND <D:P:S>,"'G4WC "Name/Description",IP
browser.
	Address/URL,IP Port,Enabled'"
	Variables:
	Name/Description = A string, enclosed in double quotes, that is the
	description of the G4 Web Control instance. It is displayed in the browser.
	IP Address/URL = A string containing the IP Address of the G4 Web Control
	server, or a URL to the G4 Web Control server.
	IP Port = A string containing the IP Port of the G4 Web Control Server.
	Enabled = 1 or 0. If it is a 1 then the link is displayed. If it is a 0 then the link is
	disabled.
	The combination of Name/Description, IP Address/URL, and IP Port are
	used to determine each unique listing.
	Example:
	SEND_COMMAND 0:1:0,"'G4WC "Bedroom",192.168.1.2,5900,1'"
	Adds the BEDROOM control device using the IP Address of 192.168.1.2.
~IGNOREEXTERNAL-	Syntax:
CLOCKCOMMANDS	SEND_COMMAND <D:P:S>,"'~IGNOREEXTERNALCLOCKCOMMANDS'"
Set the Master so that it	Example:
cannot have it’s time set by
	SEND_COMMAND 0:1:0,"'~IGNOREEXTERNALCLOCKCOMMANDS'"
another device which
generates a ‘CLOCK’
command.

138 NI-3101-SIG Signature Series NetLinx Integrated Controller