AMX NI-3101-SIG Name,Command, NAME,STRING SET Date, Set Dns Dps, SET Duet Memory, SET FTP Port

	NetLinx Security with a Terminal Connection
Help Menu Options (Cont.)
Command	Description
SEND_COMMAND D:P:S or	Sends the specified command to the device. The Command uses
NAME,COMMAND	NetLinx string syntax.
	• Ex: send_command 1:1:1,"'This is a test',13,10"
	• Ex: send_command RS232_1,"'This is a test',13,10"
SEND_STRING D:P:S or	Sends the specified string to the device.
NAME,STRING
SET DATE	Sets the current date.
SET DNS <D:P:S>	Sets up the DNS configuration of a device.
SET DUET MEMORY	Set the amount of memory allocated for Duet Java pool. This is the
	current Java memory heap size as measured in Megabytes. This
	feature is used so that if a NetLinx program requires a certain size of
	memory be allotted for its currently used Duet Modules, it can be
	reserved on the target Master.
	Valid values are 1 - 16 for 32 MB systems and 1 - 48 for a 64 MB
	system. This setting does not take effect until the next reboot.
	Note: If you are trying to accomplish this setting of the Duet Memory
	size via a NetLinx program, the program command
	"DUET_MEM_SIZE_SET(int)" should call REBOOT() following a set.
SET FTP PORT	Enables/Disables the IP port listened to for FTP connections.
SET HTTP PORT	Sets the IP port listened to for HTTP connections.
SET HTTPS PORT	Sets the IP port listened to for HTTPS connections.
SET ICSP PORT	Sets the IP port listened to for ICSP connections.
SET ICSP TCP TIMEOUT	Sets the timeout period for ICSP and i!-WebControl TCP connections.
SET IP <D:P:S>	Setup the IP configuration of a device.
SET LOG COUNT	Sets the number of entries allowed in the message log.
SET SSH PORT	Sets the IP port listened to for SSH connections.
SET TELNET PORT	Sets the IP port listened to for Telnet connections.
SET THRESHOLD	Sets the Master's internal message thresholds.
SET TIMELINE LOOPCNT	Sets the Master's timeline/event max loopcount.
SET TIME	Sets the current time.
SET UDP BC RATE	Sets the UDP broadcast rate. A broadcast message is sent by the
	Master to allow devices to discover the Master. This command allows
	the broadcast frequency to be changed or eliminate the broadcast
	message.
SET URL <D:P:S>	Setup the initiated connection list URLs of a device.
SHOW COMBINE	Displays a list of devices, levels, and channels that are currently
	combined.
SHOW DEVICE <D:P:S>	Displays a list of devices connected and attributes.
SHOW LOG <START>	Displays the message log. <start> specifies message to begin the
	display. 'all' will display all messages.
SHOW MEM	Displays the memory usage for all memory types.
SHOW NOTIFY	Displays the Notify Device List (Master-Master).
SHOW REMOTE	Displays the Remote Device List (Master-Master).
SHOW ROUTE	Displays the Master's routing information.
SHOW SYSTEM <S>	Displays a list of devices in a system.
TCP LIST	Displays a list of active TCP connections.
TIME	Displays the current time.
URL LIST <D:P:S>	Displays the initiated connection list URLs of a device.

NI-3101-SIG Signature Series NetLinx Integrated Controller 133