AMX NI-3101-SIG manual Accessing an SSL-Enabled Master via an IP Address

NetLinx Security within the Web Server

The installer can then select which module to use with that discovered device by selecting the corresponding radio box and then clicking the upper-left Save button. This action then returns the installer back to the View Discovered Devices page.

If the installer has the Duet module on a PC, the file can be downloaded to the Master via the Manage Device Modules section of the Manage Other Devices web page (FIG. 63 on page 97).

3.For Dynamically bound modules:

Begin the process of binding the Dynamic application device with the newly discovered physical device by navigating to the Manage Other Devices > Manage Device Bindings page. Dynamic application devices that have not been bound to a physical device display a Bind button.

Click the Bind button adjacent to the desired device.

From the secondary window, choose the appropriate physical device from the listing of all available unbound physical devices which matches the application device's Device SDK class type (FIG. 67 on page 105).

The Duet Module is started immediately after being “bound,” which then causes an ONLINE event to be received by the NetLinx program for the Duet Virtual device.

Accessing an SSL-Enabled Master via an IP Address

Once the target Master has been fully configured with an SSL certificate, user/group access rights, and System level security parameters, the administrator (or comparably authorized user) can decide to require additional security on the Master by making any consecutive access to the Master be done via a HTTPS (a secure version of HTTP communication). Refer to theSetting the Master’s Port Configurations section on page 74 for more information on this process.

1.Launch a web browser.

2.Enter the IP Address of the target Master into the web browser’s Address field, but preface this information with the word https (ex: https://198.198.99.99). This https is used to communicate with the target Master via the pre-configured HTTPS/SSL Port.

3.Press Enter to begin the communication process between the target Master and your computer.

NI-3101-SIG Signature Series NetLinx Integrated Controller 111