AMX NI-3101-SIG manual Help menu, Help Menu Options

NetLinx Security with a Terminal Connection

The FTP Security and Admin Change Password Security are always enabled and cannot be disabled.

Help menu

Type help at the prompt in the Telnet session to display the following help topics:

Help Menu Options

Command		Description
----- Help ----- <D:P:S>		(Extended diag messages are OFF)
		<D:P:S>: Device:Port:System. If omitted, assumes Master.
? or Help		Displays this list.
DATE		Displays the current date.
DEVICE HOLDOFF ONOFF		Sets the Master to holdoff devices (i.e. does not allow them to report
		ONLINE) until all objects in the NetLinx program have completed
		executing the DEFINE_START section.
		If set to ON, any messages to devices in DEFINE_START will be lost,
		however, this prevents incoming messages being lost in the Master
		upon startup. When DEVICE_HOLDOFF is ON, you must use ONLINE
		events to trigger device startup SEND_COMMANDs.
		By default, DEVICE HOLDOFF is OFF to maintain compatibility with
		Axcess systems where f devices are initialized in DEFINE_START.
DEVICE STATUS <D:P:S>		Provides information about the specified device.
DNS LIST <D:P:S>		Displays the DNS configuration of a device.
DISK FREE		Displays the amount of free space on the disk.
ECHO ONOFF		Enables/Disables echo of typed characters.
GET DEVICE HOLDOFF		Displays the state of the Master’s device holdoff setting.
GET DUET MEMORY		Display the amount of memory allocated for Duet Java pool. This is
		the current Java memory heap size as measured in Megabytes. An
		example is a value of 5 = 5 MB.
GET IP <D:P:S>		Displays the IP configuration of a device.
HELP SECURITY		Displays security related commands.
IP STATUS		Provides information about NetLinx IP Connections.
MEM		Shows size of the largest block of available memory.
MSG ONOFF		Enables/Disables extended diagnostic messages.
OFF	[D:P:S or NAME,CHAN]	Turns off the specified channel.
ON	[D:P:S or NAME,CHAN]	Turns on the specified channel.
PASS [D:P:S or NAME]		Puts the Session in pass mode to the specified device.
		• Mode is exited by ++ ESC ESC.
		• Display Format is set by ++ ESC n
		- If n is A, format = ASCII, D, format = Decimal, and H = Hex
PING [ADDRESS]		Pings an address (IP or URL).
		Specify -a option for reverse lookup.
PROGRAM INFO		Displays a list of program modules loaded.
PULSE [D:P:S or NAME,CHAN]		Pulses the specified channel.
REBOOT <D:P:S>		Reboots the device.
RELEASE DHCP		Releases the current DHCP lease.
ROUTE MODE DIRECTNORMAL		Sets the Master-Master route mode.

132 NI-3101-SIG Signature Series NetLinx Integrated Controller