NetLinx Security within the Web Server

Once a list of all compatible modules is compiled, the Select Device Module page (FIG. 69) is then displayed with a listing of each module along with its calculated “match” value. The greater the “match” value, the better the match between the Duet Module's properties and the physical device's properties.

Module Properties (displayed via a mouse-over popup dialog)

FIG. 69 Select Device Module page

Mousing-over a listed module entry presents a popup which displays the properties associated with the selected module.

By selecting the module and clicking the Save button, the administrator can assign a Duet module to be associated with the physical device.

This action will NOT affect any currently running Duet module associated with the physical device. The module is associated with the device upon reboot.

Clicking the Cancel button aborts the association of a Duet module with the physical device BUT it does not undo the process of pulling new modules from the Internet/device into the /unbound directory on the target Master. These modules will remain resident in the /unbound directory until they are manually deleted via the Manage Other Devices main web page. Refer to theSystem Settings - Manage Other Devices - Dynamic Device Discovery Pages section on page 97.

NI-3101-SIG Signature Series NetLinx Integrated Controller

107

 

 

Page 113
Image 113
AMX NI-3101-SIG manual Module Properties displayed via a mouse-over popup dialog