AMX NI-3101-SIG manual Configuration Port Commands, Date, Echo OFF, Echo on

Programming

In your terminal program, type "Help" or a question mark ("?") and <Enter> to display the Configuration Port commands listed in the following table.

Configuration Port Commands

Command	Description
DATE	Displays the current date and day of the week.
	Example:
	>DATE
	10/31/2004 Wed
DEVICE HOLDOFF ONOFF	Sets the Master to holdoff devices and not allow them to report online until
	the NetLinx program has completed executing the DEFINE_START
	section.
	Example:
	>Device Holdoff ON
	Device Holdoff Set.
	This command sets the state of the device holdoff. The GET DEVICE
	HOLDOFF command reveals whether the state is On or Off.
DEVICE STATUS <D:P:S>	Displays a list of all active (on) channels for the specified D:P:S. Enter
	DEVICE STATUS without the D:P:S variable, the Master displays ports,
	channels, and version information.
	Displays status of the specified Master.
	Example (on a local Master):
	>Device 0 AMX Corp.,NI-2000,v3.00.312 contains 1 Ports.
	Port	1 - Channels:256 Levels:8
		MaxStringLen=64 Types=8 bit MaxCommandLen=64 Types=8
	bit
		The following input channels are on:None
		The following output channels are on:None
		The following feedback channels are on:None
		Level 1=0 Supported data types=UByte,UInt
		Level 2=0 Supported data types=UByte,UInt
		Level 3=0 Supported data types=UByte,UInt
		Level 4=0 Supported data types=UByte,UInt
		Level 5=0 Supported data types=UByte,UInt
		Level 6=0 Supported data types=UByte,UInt
		Level 7=0 Supported data types=UByte,UInt
		Level 8=0 Supported data types=UByte,UInt
DISK FREE	Displays the total bytes of free space available on the Master.
	Example:
	>DISK FREE
	The disk has 2441216 bytes of free space.
DNS LIST <D:P:S>	Displays:
	• Domain suffix·
	• Configured DNS IP Information
	Example:
	>DNS LIST [0:1:0]
	Domain suffix:amx.com
	The following DNS IPs are configured
	Entry 1-192.168.20.5
	Entry 2-12.18.110.8
	Entry 3-12.18.110.7
ECHO OFF	Disables terminal character's echo (display) function.
ECHO ON	Enables terminal character's echo (display) function.
GET DEVICE HOLDOFF	Displays the state of the device holdoff setting in the Master.
	Example:
	>GET DEVICE HOLDOFF
	Device Holdoff is off.
	This command reveals the state of the device holdoff set using the
	DEVICE HOLDOFF ONOFF command.

NI-3101-SIG Signature Series NetLinx Integrated Controller 141