AMX NI-3101-SIG manual Option 8 Edit Group, Or Enter to return to previous menu Set Rights

NetLinx Security with a Terminal Connection

Edit Group menu: Change Access Rights

1.At the Edit Group prompt, type 4 to change the current access rights for the selected group account. A sample session response is:

Select to change current access right
1)	Terminal (RS232) Access	Disabled
2)	Admin Change Password Access	Disabled
3)	FTP Access	Disabled
4)	HTTP Access	Enabled
5)	Telnet Access	Enabled
6)	Configuration Access	Enabled
7)	ICSP Access	Enabled
8)	ICSP Encryption Required	Enabled

Or <ENTER> to return to previous menu

Set Rights ->

2.Each selection simply toggles the security setting selected. <Enter> is entered by itself to exit the menu and return to the Main Security Menu.

Changes made to the target Master from within the Terminal window are not reflected within the web browser, until the Master is rebooted and the web browser connection is refreshed.

Any changes made to the Master, from within the web browser are instantly reflected within the Terminal session without the need to reboot.

Edit Group menu: Display Access Rights

1.At the Edit Group prompt, type 5 to view the current access rights for the selected group account. A sample session response is:

Terminal (RS232)	Disabled
Admin. Password Change	Disabled
FTP	Disabled
HTTP	Disabled
Telnet	Disabled
Configuration	Disabled
ICSP	Disabled

Press <ENTER> key to continue

2.Press <Enter> to return to the Edit Group menu.

Option 8 - Edit Group

1.Type 8 and <Enter> at the Security Setup prompt (at the bottom of the Main Security Menu) to edit an existing group account. A sample session response is:

Select from the following list:

1)administrator

2)Group 1

3)Group 2 Select group ->

NI-3101-SIG Signature Series NetLinx Integrated Controller 127