AMX NI-3101-SIG manual SET Baud, Tset Baud, Txclr, Xoff

	Programming
RS-232/422/485 Send_Commands (Cont.)
Command	Description
SET BAUD	Syntax:
Set the RS-232/422/485	SEND_COMMAND <DEV>,"'SET BAUD
port's communication	<baud>,<parity>,<data>,<stop> [485 <Enable Disable>]'"
parameters.	Variables:
	baud = baud rate is: 115200.
	parity = N (none), O (odd), E (even), M (mark), S (space).
	data = 7 or 8 data bits.
	stop = 1 and 2 stop bits.
	485 Disable = Disables RS-485 mode and enables RS-422.
	485 Enable = Enables RS-485 mode and disables RS-422.
	Note: The only valid 9 bit combination is (baud),N,9,1.
	Example:
	SEND_COMMAND RS232_1,"'SET BAUD 115200,N,8,1 485 ENABLE'"
	Sets the RS232_1 port's communication parameters to 115,200 baud, no
	parity, 8 data bits, 1 stop bit, and enables RS-485 mode.
TSET BAUD	TSET BAUD works the same as SET BAUD, except that the changes are not
Temporarily set the RS-232/	permanent, and the previous values will be restored if the power is cycled on
	the device.
422/485 port's
	Syntax:
communication parameters
for a device.	SEND_COMMAND <DEV>,"'TSET BAUD
	<baud>,<parity>,<data>,<stop> [485 <Enable Disable>]'"
	Variables:
	baud = baud rate is: 115200.
	parity = N (none), O (odd), E (even), M (mark), S (space).
	data = 7, 8, or 9 data bits.
	stop = 1 or 2 stop bits.
	485 Disable = Disables RS-485 mode and enables RS-422.
	485 Enable = Enables RS-485 mode and disables RS-422.
	Note: The only valid 9 bit combination is (baud),N,9,1.
	Example:
	SEND_COMMAND RS232_1,"'TSET BAUD 115200,N,8,1 485
	ENABLE'"
	Sets the RS232_1 port's communication parameters to 115,200 baud, no
	parity, 8 data bits, 1 stop bit, and enables RS-485 mode.
TXCLR	Syntax:
Stop and clear all characters	SEND_COMMAND <DEV>,"'TXCLR'"
waiting in the transmit out	Example:
buffer and stops transmis-
	SEND_COMMAND RS232_1,"'TXCLR'"
sion.
	Clears and stops all characters waiting in the RS232_1 device's transmit buffer.
XOFF	Syntax:
Disable software	SEND_COMMAND <DEV>,"'XOFF'"
handshaking (default).	Example:
	SEND_COMMAND RS232_1,"'XOFF'"
	Disables software handshaking on the RS232_1 device.

NI-3101-SIG Signature Series NetLinx Integrated Controller 157