Patton electronic SmartNode 4110 Series manual Mode Message inbound

SmartWare Software Configuration Guide51 • Location Service

Mode: Message inbound

Step Command Purpose

1[node](msgin)#[no] message server <host> Configures the address of the message server to

		[<port>]	send your subscription requests for explicit sub-
			scription. When no message-server is configured,
			the subscription requests are sent to the first
			domain entry in the location-service.
Mode: Message inbound
	Step	Command	Purpose
1	[node](msgin)#[no] lifetime <seconds>	Configures the desired lifetime of the explicit sub-
			scription. When no lifetime is configured the
			desired lifetime is set to 3600 seconds.
Mode: Message inbound
	Step	Command	Purpose
1	[node](msgin)#[no] retry-timeout (on-cli-	Configures the time to wait after a failed subscrip-
		ent-error on-system-error on-server-	tion according to three different error categories.
		error] <seconds>	After this time we begin to subscribe from new. If
			no retry-timeout is configured the retry-timeout is
			set to 10 seconds.
Mode: Message inbound
	Step	Command	Purpose
1	[node](msgin)#proxy <host> [<port>]	Adds a new proxy entry to the message inbound
		[strict-route]	face. For each proxy configured there is a route-
		or	header added to the SUBSCRIBE requests in
		[node](msgin)#proxy <index> <host>	explicit subscription. If more than one proxy entry
		[<port>] [strict-route]	has to be entered, the order of the list can be mod-
		or	ified by using the index and/or the insert key-
		[node](msgin)#proxy before <index>	words before and after.
		<host> [<port>] [strict-route]
		or
		[node](msgin)#proxy after <index> <host>
		[<port>] [strict-route]
Mode: Message inbound
	Step	Command	Purpose
	1	[node](msgin)#proxy none	Removes all proxy entries and disables explicitly
			the use of a proxy.

Location Service configuration task list 621