Patton electronic SmartNode 4110 Series Example Create an administrator and an operator account

SmartWare Software Configuration Guide 8 • RADIUS Client Configuration

servers are down or the network is not reachable, you can create an emergency user in the local database so that you can still access the SmartNode. Perform the following steps to configure the local accounts.

Mode: Configure

Step	Command	Purpose
1	node(cfg)#[no] administrator name pass-	Adds an administrator account to the local data-
	word password	base. The no form removes an existing account
2	node(cfg)#[no] operator name password	Adds an operator account to the local database.
	password	The no form removes an existing account
3	node(radius)[name]#shared-secret	Sets the password shared between the RADIUS
	authentication secret	client (the SmartNode) and the remote RADIUS
		server.
4	node(pf-auth)[name]#show accounts	Display existing accounts

Example: Create an administrator and an operator account

node>enable

node#configure

node(cfg)#administrator meier password pencil node(cfg)#operator james password "" node(cfg)#show accounts

Administrator accounts: meier

Operator accounts: james

node(cfg)

Note If you are creating an account that does not require a password, type "" to indicate that no password is needed. For example, if you were configuring an account for an operator named James that did not need a password, the entry would be:

node(cfg)#operator james password ""

Configuring the local database accounts 112