Patton electronic SmartNode 4110 Series Mode Call outbound, Call inbound face, Mode Call inbound

SmartWare Software Configuration Guide51 • Location Service

Mode: Call outbound

	Step	Command	Purpose
1	[node](callout)#proxy <index> down <posi-	If multiple proxies are configured the entry at the
		tions>	index can be moved in the proxy list up or down
		or	the number of positions given in the command.
		[node](callout)#proxy <index> up <posi-
		tions>
Mode: Call outbound
	Step	Command	Purpose
1	[node](callout)#no proxy [<index>]	Removes the proxy entry at the index or remove all
			proxy entries if no index is given.
Mode: Call outbound
	Step	Command	Purpose
1	[node](callout)#proxy none	Removes all proxy entries and disables explicitly
			the use of a proxy.

Call inbound face

The call inbound face is used to configure call properties for incoming calls.

Mode: Identity

Step Command Purpose

1[node](identity)[name]# [no] call inbound Adds a new face to the identity. The no form of the command removes an existing face with all content in it.

Mode: Call inbound

Step	Command	Purpose
1	[node](callin)[name]# [no] use profile	Adds or removes a profile to use if an incoming
	(siptone-setvoip) <profile>	call destines this identity.

Location Service configuration task list 617