Patton electronic SmartNode 4110 Series manual Configuring a spoofed contact address

SmartWare Software Configuration Guide 46 • Context SIP gateway overview

Configuring a spoofed contact address

If the device is located behind a NAT, this command can be used to provide the Contact (SIP/SDP) and VIA headers of outgoing requests with the public ip address.

Mode: Transport Interface

Step

1

Command	Purpose
[node](sip-if)[name]# [no] spoofed-con-	Applies a spoofed contact address to the
tact <address>	transport interface.

Binding location services

The bind location-servicecommand binds predefined location services to the context SIP gateway. The no form of the command removes a bound location service. All bound location services define the domains and identities for the context SIP gateway. Identity features, such as outbound registration, inbound registration, and authentication, may or may not be executed, depending on the specific confirguation for the identity. Also, they provide transport properties, like Proxy or Traffic Class, and media configuration parameters, like VoIP Profile, SIP Profile or Tone Profile. For more information about configuration of location services and identi- ties, see Chapter 51, “Location Service” on page 607.

Mode: Context SIP Gateway

Step

1

Command	Purpose
[node](sip-gw)[name]# [no] bind loca-	Add a location service binding to this context
tion-servicelocationservice	SIP gateway or removes an existing one.

Enabling/disabling the context SIP gateway

The shutdown command disables the context SIP gateway. The no shutdown command enables the context SIP gateway.

Mode: Context SIP Gateway

Step

1

Command	Purpose
[node](sip-gw)[name]# [no] shutdown	Disables the Context SIP Gateway. The no
	form of the command enables the Context SIP
	Gateway.

Context SIP Gateway configuration task list 563