Vulcan-Hart VRT32I ML-138024 Lockout / Tagout Procedure, Service & Parts Information

VCH & VRT SERIES OVENS F-38055 (11-09)

LOCKOUT / TAGOUT PROCEDURE

WARNING Always perform the LOCKOUT / TAGOUT PROCEDURE of your facility before removing any sheet metal panels or attempting to service this equipment.

FAILURE TO COMPLY WITH THIS PROCEDURE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH.

The Lockout / Tagout Procedure is used to protect personnel working on an electrical appliance. Before performing any type of maintenance or service on an electrically operated appliance, follow these steps:

1.In electrical box, place unit’s circuit breaker into OFF position.

2.Place a lock or other device on electrical box cover to prevent someone from placing circuit breaker ON.

3.Place a tag on electrical box cover to indicate that unit has been disconnected for service and power should not be restored until tag is removed by maintenance personnel.

4.Disconnect unit power cord from electrical outlet.

5.Place a tag on cord to indicate that unit has been disconnected for service and power should not be restored until tag is removed by maintenance personnel.

SERVICE & PARTS INFORMATION

To obtain Service and Parts information concerning this model, contact Vulcan-Hart Service Department at the address listed on the front cover of this manual or refer to our website: www.vulcanhart.com for a complete listing of Authorized Service and Parts depots.

Customer Service 1-800-814-2028

Technical Service	1-800-814-2028
Service Parts	1-800-814-2028

When calling for service, have the model number and serial number available.

Page 9