Vulcan-Hart VRT32I ML-138024 operation manual Electrical Requirements, Electrical Connections

VCH & VRT SERIES OVENS F-38055 (11-09)

ELECTRICAL REQUIREMENTS

diagrams and Specification Chart in the back of this manual.

ELECTRICAL CODES & STANDARDS:

The oven must be installed in accordance with:

In the United States of America:

1.State and Local Codes.

2.National Electrical Code, ANSI/ NFPA-70 (latest edition.) Copies may be obtained from: The

National Fire Protection Association, 1Batterymarch Park, Quincy, MA 02269.

1-617-770-3000 www.nfpa.org

In Canada:

1.Local Codes.

2.Canadian Electrical Code, CSA C22.1 (latest edition.) Copies may be obtained from: The Canadian Standard Association. www.csa.ca

ELECTRICAL CONNECTIONS:

The oven is factory wired for either 110/120 volt single phase or 208/240 volt three phase operation. All 110/120 volt cabinets are equipped with an 8 foot cord and NEMA 5-15 plug as standard equipment. All 208/240 volt cabinets are equipped with an 8 foot cord and NEMA 6-15 plug. Refer to wiring

Page 4

The cord and plug supplied is a suitable durable cord with a proper strain relief.

WARNING: All 110/120 volt ovens are equipped with a three-prong plug. It is imperative that this plug must be connected into a properly grounded

three-prong receptacle. If the receptacle is not the proper grounding type, contact an electrician. DO NOT REMOVE THE GROUNDING PRONG FROM THIS PLUG.

CAUTION: Verify that the power source matches the Serial Data Plate located on the lower back corner of the oven and the plug configuration before the connection is made. (Fig.1)

SERIAL DATA PLATE

(Fig. 1)