Patton electronic SmartNode 4110 Series manual 520

SmartWare Software Configuration Guide 40 • Call router configuration

#

#Bearer capability routing table “TAB-ISDN-SERVICE”

routing-table itc TAB-ISDN-SERVICE

route unrestricted-digital dest-interface IF-LOCAL-BREAKOUT route default dest-table TAB-DEST-A

#

#Called party number routing table “TAB-DEST-A”

routing-table called-e164 TAB-DEST-A

route 0 dest-interface IF-LOCAL-BREAKOUT MAP-CAC-ORANGE route 00 dest-interface IF-NODE-C MAP-CLI-MELON

route 07[4-6] dest-interface IF-LOCAL-BREAKOUT MAP-CAC-APPLE route 0336652... dest-interface IF-NODE-B

route default dest-interface IF-LOCAL-BREAKOUT

#

#Number manipulation “CAC-APPLE”; add prefix 1055

mapping-table called-e164 to called-e164 MAP-CAC-APPLE map (.%) to 1055\1

#

#Number manipulation “CAC-ORANGE”; add prefix 1066

mapping-table called-e164 to called-e164 MAP-CAC-ORANGE map (.%) to 1066\1

#

#Number manipulation “CLI-MELON”

#Truncate CLI to last 2 digits and add 08004455 prefix in front

mapping-table calling-e164 to calling-e164 MAP-CLI-MELON map .%(..) to 08004455\1

Prior to downloading this file you should make sure there are no other tables and functions in the call router.

node(ctx-cs)[switch]#copy tftp://172.16.36.20/configs/SRconf.cfg running-config Download...100%

Now we have to enable advanced call routing for outgoing calls and basic interface routing for incoming calls: Calls arriving on the interface from the PBX are routed to the SVC-FALLBACK service while incoming calls from the other interfaces are routed directly to the IF-PBX-A interface.

node(ctx-cs)[switch]#interface isdn IF-PBX-A node(if-pstn)[IF-PBX-A]#route dest-service SVC-FALLBACK node(if-pstn)[IF-PBX-A]#exit node(ctx-cs)[switch]#interface isdn IF-LOCAL-BREAKOUT node(if-isdn)[IF-LOCA~]#route dest-interface IF-PBX-A

Call router configuration task list 520