SmartWare Software Configuration Guide

8 • RADIUS Client Configuration

 

 

node(cfg)#

Configuring RADIUS accounting

The RADIUS accounting functionality can be added to a call-router configuration by inserting an AAA call- control service between two call-router elements. Any call that is then routed through the AAA service will cause call detail records (CDRs) to be sent to the radius server. Normally an accounting start record is sent when the call is connected and the accounting stop record is sent, when the call is disconnected. If enabled, the

AAAservice is also able to send interim update records, after a specified interval. The AAA service can include the following standard RADIUS attributes in the CDRs:

ATTRIBUTE Acct-Status-Type

ATTRIBUTE Acct-Session-Time

ATTRIBUTE Acct-Session-Id

ATTRIBUTE NAS-Identifier

ATTRIBUTE Called-Station-Id

ATTRIBUTE Calling-Station-Id

Additionally, the following vendor specific attributes are available to support voice service specific information:

#

#dictionary.patton

VENDOR

Patton

1768

 

 

#

 

 

 

 

#

Name

Id

Type

Vendor Note

#

 

 

 

 

ATTRIBUTE Setup-Time 32 string Patton a)

ATTRIBUTE Connect-Time 33 string Patton a)

ATTRIBUTE Disconnect-Time 34 string Patton a)

ATTRIBUTE Disconnect-Cause 35 integer Patton b)

ATTRIBUTE Disconnect-Source 36 string Patton c)

ATTRIBUTE Called-Unique-Id 48 string Patton d)

ATTRIBUTE Called-IP-Address 49 ipaddr Patton

ATTRIBUTE Called-Numbering-Plan 50 string Patton e)

ATTRIBUTE Called-Type-Of-Number 51 string Patton f)

ATTRIBUTE Calling-Unique-Id 80 string Patton d)

ATTRIBUTE Calling-IP-Address 81 ipaddr Patton

ATTRIBUTE Calling-Numbering-Plan 82 string Patton e)

ATTRIBUTE Calling-Type-Of-Number 83 string Patton f)

ATTRIBUTE Calling-Presentation-Indicator 88 string Patton g)

ATTRIBUTE Calling-Screening-Indicator 89 string Patton h)

a)Format of timestamps is "WWW MMM DD HH:MM:SS YYYY" Example: "Wed Jun 15 09:20:55 2005"

b)ITU-T Q.931 cause value (1-127)

c){ originator terminator internal }

d)Contains the Call-Id for SIP or H.323

e){ e.164 data telex national private }

f){ international national network specific subscriber abbreviated }

g){ allowed restricted unavailable }

h){ user-provided, not screened user-provided, verified and passed user-provided, verified and failed network provided }

Note The subset of information elements that is actually included in a CDR is dependant on the type of call and the information already available at the time the CDR is sent.

RADIUS configuration

108

Page 108
Image 108
Patton electronic SmartNode 4110 Series manual Configuring Radius accounting, Vendor