Patton electronic SmartNode 4110 Series manual Egress Interface

SmartWare Software Configuration Guide 40 • Call router configuration

not the egress interface propagates the address-complete indication depends on the interface configuration (see below).

The next table shows the different digit-collection terminating-character configurations and their effect on a T- terminated route when the terminating-character is received.

Digit Collection Terminating-Char				Ingress Properties		Egress Properties
	Configuration					(Result of call-routing)
Terminating-		append-	set-	called-e164	Address-	called-e164	Address-
Char		terminating-	address-		Complete		Complete
		char	complete-		Indication		Indication
			indication
No		no	no	123#	False	123#	false
					true		true
			yes		false		false
					true		true
		yes	no		false		false
					true		true
			yes		false		false
					true		true
Yes		no	no		false	123	false
					true		true
			yes		false		true
					true		true
		yes	no		false	123#	false
					true		true
			yes		false		true
					true		true

The command digit-collectionfull-matchhas been introduced. The syntax is:

digit-collection full-match [append-terminating-char] [set-address-complete-indication]

This command configures what action(s) shall be performed when a dollar-($)-terminated rule is selected in a called-e164 routing-table. We call such an entry a fully specified number entry. The append-terminating-charaction appends the terminating-character; while the set-address-complete-indicationaction sets the address- complete indication. Whether or not the egress interface propagates the address-complete indication depends on the interface configuration (see below).

Egress Interface

On the egress interface (ISDN, H.323) the address-complete-indication emit <type> command configures how the internal representation of the address-complete indication shall be mapped to the representation of the signaling-protocol.

Call router configuration task list 495