Patton electronic SmartNode 4110 Series manual Dial-up on monitor, Dial-up nailed

SmartWare Software Configuration Guide 30 • PPP configuration

Dial-up on monitor

Dial when a monitored interface is reported down and drop when that interface is reported up again. A delay time prevents to dial or drop if the monitored interface changes the state only for a short time.

Mode: context ip/interface

Step	Command	Purpose
1	[name] (if-ip) [interface]#[no] dial-up mon-	Configure dial-up to monitor the interface
	itor interface <ip-interface> [dial delay	specified. Dial delay specifies the timeout
	<seconds>] [drop delay <seconds>]	before dialing (Default 10). Drop delay speci-
	[queue-limit <number>]	fies the timeout before dropping connection
		(Default 10). Queue-limit specifies the max.
		number of packets to queue while the link is
		down (Default 4).

Dial-up nailed

Dial if possible, and never drop.

Mode: context ip/interface

Step	Command	Purpose
1	[name] (if-ip) [interface]#[no] dial-up	Configure dial-up nailed. Queue-limit speci-
	nailed [queue-limit <number>]	fies the max. number of packets to queue
		while the link is down (Default 4).

PPP Dial-up over ISDN 338